Hydraulic Cylinders In Brisbane

There are many types of machines and power systems that have hydraulic systems. The most common, however, is the braking system of automobiles, which rely on hydraulics to work. When it comes to systems with hydraulic cylinders in Brisbane, however, earth movers, backhoes, excavators and graders top the list. This is because these machines have large cylinders that are used to move the heavy parts. There are many types of hydraulic cylinders. The most common, however, are the single and double acting cylinders. Telescopic cylinders are also used in a number of applications, including the lifting kit in tipper trucks as well as hydraulic car jacks. When these cylinders develop a problem, prompt repairs must be carried out to ensure the system continues to perform as expected. The following are some common problems affecting hydraulic cylinders:

i) Bent Piston Rods

Hydraulic cylinders normally have piston rods that move in and out of the cylinder when the fluid is released into the chamber inside the cylinder. The piston can bend due to excessive forces or improper application of the force due to poor use. The problem can be resolved by straightening the rod or by replacing it.

ii) Worn Out Seals

Hydraulic cylinders normally have oil seals to prevent the hydraulic fluid from escaping to unwanted spaces when a lot of force is exerted. If the seal is damaged, the fluid will escape to the sides of the piston, which will lead to loss of power in the system. Fortunately, replacing the seal is all that is needed to resolve the problem. A mechanical engineering technician or an hydraulic expert is able to do this job.

iii) Damaged Oil Pump

The oil pump is responsible for building up fluid pressure in the system. If the pump is damaged in one way or another, the system will not perform optimally. The pump can be repaired or replaced if it has been damaged beyond repair.

Finding the Right Hydraulic Cylinder Repair Expert

You cannot expect to have your hydraulic power system to be repaired by your ordinary mechanic. This is because these systems are sophisticated, so they must be handled by mechanical engineering technicians who have the right training, experience and equipment needed to properly care for your system.

The number of years the firm has been in business, their reputation and rates they charge for hydraulic repairs are key factors to consider, so be sure to take your time to do the necessary research to ensure you find the right expert. Be sure to also compare the rates charged by different firms to find the most affordable service provider.